~ Plastpro sells an unfinished door product, and requires finishing the door less than a month after site installation to minimize any potential cosmetic issue.
~ Do not expose door to extreme environmental elements in the time periods of: storage, installation, or other home maintenance (i.e. roof removal, etc.).
~ Machined doors cannot be stored outside on site prior to installation. On site prehung doors with no face bore protection from the weather will void the warranty. Unprotected exposure of the doors internal reinforced material during handling violates our door’s hydro shield design.
~ Any accident, negligence, abuse or improper installation of the door. Installed in abnormal or extreme locations or situations.
~ Improper finishing or assembly of hardware, such as the lack of applying the sealant properly for the lockset that may compromise our doors internal reinforced material.
~ Any Improper pre-installation storage issues.
~ Any water and / or air infiltration damage due to inadequate installation.
~ Doors trimmed more than 5/8” off the bottom of the maximum length, or any alteration(s) to the door skin that could affect and / or change the skin thickness, will void the terms of this Limited Warranty.
~ See our staining / painting guides, and our installation topics on our website “How To Guides” @ http://www.plastproinc.com/how-to-guides
~ Failure to comply with any of the above issues will cause the warranty to be void.